Ref. 3843 - Packing with 4 0,5g syringes with 20 intracanal tips.
Ref. 8110 - Pack of Bio-C Sealer intracanal tips (orange color) with 20 units
1. Can Bio-C Sealer Ion+ be used without gutta-percha cones?The recommended technique is to use it with gp cones, as sealer only should be harder to be removed if needed.
2. What is the setting time of BIO-C SEALER ION+?The setting time is ≤240 minutes and depends on canal humidity level.
3. Should I leave the canal moist in order to use BIO-C SEALER ION+?No, moisture, which initiates the material setting, comes from apical tissues and dentinal tubules.
4. What is the resin used as base in BIO-C SEALER ION+?BIO- C SEALER ION+ has no resinous base. Its viscosity is given by a long-chain alcohol, the polyethylene glycol. Therefore, the product is more biocompatible and easier to clean.
5. How should I store BIO-C SEALER ION+?The storage should be in a dry ventilated place and it SHOULD NOT BE STORED IN THE FRIDGE.
6. Can BIO-C SEALER ION+ be used in single cone techniques?Yes, the product can be used for both cold single or lateral condensation techniques.
7. What is the difference between BIO-C SEALER ION+ and MTA-Fillapex?BIO-C SEALER ION+ is a non-resin based ready-to-use bioceramic sealer with a 65% bioceramic load. MTA-Fillapex is a resin based bioceramic sealer (salicylate resin), dual paste, with a 13% bioceramic load.
8. How many conduits are possible witch 1 BIO-C SEALER ION+ syringe?It is possible to perform 10 to 12 root canal obturations.
9. Is the BIO-C SEALER resorbable when extruded to the periapical region?The BIO-SEALER ION + has in its
composition modified calcium silicate and calcium sulfate which, when in
contact with water, are hydrated in the form of hydrated modified calcium
silicate (Ca2MgSi2O7.H2O) and hydrated calcium sulfate (CaSO4. 2H2O), both are
poorly soluble, causing saturation in the physiological environment and
consequently, precipitation of needle-shaped crystals. The imbrication of these
needle-shaped crystals (CaSO4.2H2O) with modified Ca2MgSi2O7.H2O crystals
provide cohesion and mechanical strength while promoting desirable expansion. A
portion of the material in the form of calcium, magnesium, and hydroxyl ions
can be absorbed quickly in contact with perirradicular tissues if accidentally
extruded. However, Ca2MgSi2O7.H2O and CaSO4.2H2O are matrices that in the
presence of the radiopacifying content (zirconium oxide) represent the
insoluble part of the product, and exhibit high chemical stability, being not
absorbed or solubilized.
10. How many bioceramic content are in the BIO-C SEALER composition?The product has about 67.5% of bioceramic content in its composition.
